Browse Categories

Charge Controllers

Balance of Systems/Electric/Charge Controllers  
Viewing Page 1 of 3 (26 results)

OUTBACK 80 AMP CONTROLLER

Item #: OB-FM80

Supplier Part #: FM80-150VDC

OUTBACK 80 AMP CONTROLLER

/EA UOM: EA
IN STOCK


Add to Quote

Outback Mate 3

Item #: OB-MATE3S

Supplier Part #: MATE3S

Outback Mate 3 UL 1741 SA Certified

/EA UOM: EA
NOT IN STOCK


Add to Quote
MIDNITE 150 VOLT INPUT CONTROLLER

MIDNITE 150 VOLT INPUT CONTROLLER

Item #: MN-CLASSIC 150

Supplier Part #: CLASSIC 150
Brand: Classic MPPT Charge Controller

The Classic 150 MPPT Charge Controller is MidNite Solar’s most popular model. It has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 150 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

/EA UOM: EA
NOT IN STOCK


Add to Quote
MIDNITE SOLAR ONLY CONTROLLER

MIDNITE SOLAR ONLY CONTROLLER


Supplier Part #: CLASSIC 150-SL
Brand: Classic MPPT Charge Controller

The Classic SL-150 MPPT Charge Controller is a simplified SOLAR ONLY version of the Classic 150 with streamlined menus. The Classic SL-150 has a graphics panel and ground fault but no arc fault or Ethernet capabilities. The Classic SL-150 has a maximum output current of 96 amps, an operating voltage of 150 volts and works with 12 to 72 volt battery systems. As with the whole Classic line, the Classic 150-SL has MidNite’s exclusive HyperVOC which extends VOC limits when needed.. With a streamlined menu, these SOLAR only MPPT charge controllers are easy to setup and a breeze to install.

/EA UOM: EA
NOT IN STOCK


Add to Quote
MIDNITE 200 VOLT INPUT CONTROLLER

MIDNITE 200 VOLT INPUT CONTROLLER

Item #: MN-CLASSIC 200

Supplier Part #: CLASSIC 200
Brand: Classic MPPT Charge Controller

The Classic 200 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 200 has a maximum output current of 79 amps, an operating voltage of 200 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 200 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

/EA UOM: EA
NOT IN STOCK


Add to Quote
30 Amp Controller NEMA 3R 12/24V

30 Amp Controller NEMA 3R 12/24V

Item #: MN-BRAT

Supplier Part #: MNBRAT
Brand: Brat Charge Controller

The Brat is simply the most versatile solar controller in its class. The Brat is a finely-tuned solar PWM charger capable of providing up to 30 Amps of charging current, with class-leading lighting and load control features including one-of-a-kind Solar Clock. Rain-proof out of the box, and supporting dead-battery charging and low-voltage load disconnect, The Brat is perfect for outdoor, marine, RV, and unattended remote applications. The Brat doesn’t skimp on features, including temperature-compensated charging, manual and 30-day automatic equalize.

/EA UOM: EA
NOT IN STOCK


Add to Quote
MORNINGSTAR SUNLIGHT 10 - 24

MORNINGSTAR SUNLIGHT 10 - 24

Item #: SL10-24

Supplier Part #: SL-10L-24V
Brand: SunLight Charge Controller

Morningstar SunLight solar charge controller is World’s leading solar lighting controller for street and pathway lighting, parking areas, bus stations, signage, and much more. This unit is based off of our reliable epoxy coated SunSaver design and the addition of a microcontroller for automatic lighting control functions. 10A. 24V.

NOT IN STOCK


Add to Quote
MPPT KID 30Amp Charge controller

MPPT KID 30Amp Charge controller

Item #: MNKID-B

Supplier Part #: MNKID-B
Brand: Classic MPPT Charge Controller

The KID is the most versatile medium sized charge controller on the market. Ideal for small renewable energy systems. The KID allows for true input paralleling. As your power needs grow, add more modules to the array and a second KID. This will give twice the power from a single array. The KID has a fully adjustable intelligent lighting controller built in. It can turn lighting on at dusk for a select number of hours, turn it off for a length of time and then back on for a programmable number of hours before dawn. All time functions are fully adjustable, allowing users to save valuable energy. An additional feature in the lighting controller allows you to adjust the voltage needed on the PV module for the Kid to register “daytime”. This is important if you are using the Kid for a solar street light and the lights are located above the PV modules. Most controllers would end up leaving the light off all night, but not the KID. Now includes AGS (Auto Generator Start).

/EA UOM: EA
NOT IN STOCK


Add to Quote
MIDNITE 250 VOLT INPUT CONTROLLER

MIDNITE 250 VOLT INPUT CONTROLLER

Item #: MN-CLASSIC 250

Supplier Part #: CLASSIC 250
Brand: Classic MPPT Charge Controller

The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

/EA UOM: EA
NOT IN STOCK


Add to Quote
Classic Lite Charge controller 150 V

Classic Lite Charge controller 150 V


Brand: Classic Replacement Power Board

Classic Replacement Power Boards for Classic 150, 150 Lite & 150 SL Power Board.

/EA UOM: EA
IN STOCK


Add to Quote
  • 1
  • 2
  • 3
  • NEXT »