Charge Controllers

The Marine KID is the most versatile medium sized charge controller on the market. Ideal for small renewable energy systems (boats, RV’s, Cabins). The KID allows for true input paralleling. As your power needs grow, add more modules to the array and a second KID. This will give twice the power from a single array. The Kid has a fully adjustable intelligent lighting controller built in. It can turn lighting on at dusk for a select number of hours, turn it off for a length of time and then back on for a programmable number of hours before dawn. All time functions are fully adjustable, allowing users to save valuable energy. An additional feature in the lighting controller allows you to adjust the voltage needed on the PV module for the Kid to register “daytime”. This is important if you are using the Kid for a solar street light and the lights are located above the PV modules. Most controllers would end up leaving the light off all night, but not the KID. The KID now includes AGS (Auto Generator Start).

The Classic 250 MPPT Charge Controller has Arc Fault, Ground Fault, free web monitoring, a graphics panel and Solar, Hydro and Wind Modes. The Classic 250 has a maximum output current of 63 amps, an operating voltage of 250 volts and works with 12 to 72 volt battery systems. The FREE MidNite Solar Local Application enables you to monitor your Classics over your local network or the Internet. As with the whole Classic Line, the Classic 250 has MidNite’s exclusive HyperVOC which extends VOC limits when needed.

The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry. The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. It can charge Lead-Acid, Lithium, NiCd, and other battery chemistries. Custom settings programming is required for Lithium, NiCd, and other battery chemistries. 15A. 12V.

Morningstar SunGuard is a single module, compact PWM solar charge controller for small systems, ideal for both professional and consumer use. With SunGuard, there’s no reason not to insist on Morningstar quality with any system design—no matter how small.

A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs. Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.

The Steca Solarix 2525 solar charge controllers are a further development of the globally popular Steca PR controller family. Thanks to the increased module and load current, the controllers are now also suitable for even larger systems. The units also have an integrated USB charging socket that can be used to charge smartphones and tablets. The latest charging technologies combined with a state of charge determination result in optimal battery care and control. A large display uses symbols to inform users about all of the operating states. The state of charge is displayed visually as a level meter. Data such as voltage, current and state of charge can also be shown digitally as a number on the display. The controller also has an energy counter that users can reset themselves.

The Steca Solarix 4040 solar charge controllers are a further development of the globally popular Steca PR controller family. Thanks to the increased module and load current, the controllers are now also suitable for even larger systems. The units also have an integrated USB charging socket that can be used to charge smartphones and tablets. The latest charging technologies combined with a state of charge determination result in optimal battery care and control. A large display uses symbols to inform users about all of the operating states. The state of charge is displayed visually as a level meter. Data such as voltage, current and state of charge can also be shown digitally as a number on the display. The controller also has an energy counter that users can reset themselves.

SCI CHARGE CONTROLLER

OUTBACK 60 AMP CONTROLLER

The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry. The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. It can charge Lead-Acid, Lithium, NiCd, and other battery chemistries. Custom settings programming is required for Lithium, NiCd, and other battery chemistries. 15A. 12V. Comes with meter.