Load Centers and Enclosures

The IronRidge Rail-Mounted JayBox is a versatile junction box that provides secure wire enclosure for almost any solar project. It offers ample space to house up to four module strings, ensuring optimal safety and functionality. The box is designed to be easily mounted on rails, making it a convenient and flexible solution for solar installations.

A versatile combiner box from MidNite Solar. What makes this enclosure different is the Dead Front cover allowing this box to be used as a mini-load center if needed. Accommodates 6 DIN mount breakers and comes with both negative and ground bus bars in this 3R weatherproof enclosure. The combiner can be mounted in the vertical position or slanted backwards to accommodate up to a 3/12 roof pitch.

Economical Combiner Box or load center for up to 3 DC circuits. Holds 3 DIN mount circuit breakers. Includes Finger Bus for breakers, and Negative and Ground Bus Bars. Bus Bars accept up to 1/0 wire. ETL Listed Type 3R Aluminum Enclosure. For additional information, see the spec sheet below. Midnite PN: MNPV3 Combiner

DESCRIPTION:
Enclosure only
(For 300 VDC charge controllers and 600 VDC grid tie inverters) Gray aluminum type 3R rainproof enclosure with insulating dead front, will accept 12 300VDC breakers or 10 touch-safe fuse holders. Can support two inverters of up to 5 strings each, or a transformerless inverter of up to 5 strings.
Photo shows MNPV12 with either breakers or fuses which can be separated or combined.
This Combiner can be configured in 3 ways:
A single 10 string combiner for a transformer based (Grounded) inverter using 10 positive fuses
2 separate 5 string combiners for 2 transformer based (Grounded) inverters using 5 positive and 5 positive fuses
A single 5 string transformer less (Ungrounded) combiner 5 positive and 5 negative fuses
Includes 2 isolated 15 position PV negative bus bars, 15 position ground bus bar, and 200 amp Plus bus bar for breakers and fuses. Plus busbars can be combined or separated to support 2 inverters or charge controllers.
Breakers/fuse holders sold separately.
Type 3R environmental rating
Warranty – 5 yrs.
Listed by ETL for US & Canada
Made in the USA

DESCRIPTION:
General use powder coated aluminum enclosure for 4 panel mount type breakers from 5 – 100 Amp.
Not recommended for use with cables larger than awg #4 (19mm).
Environmental Rating – Type 1 (Indoor)
Max. AC Voltage – Up to 240Vac
Max. DC Voltage – DC up to 300Vdc
Warranty – 5 yrs.
Listed by ETL for US & Canada
Made in the USA

DESCRIPTION:
General use powder coated aluminum enclosure for retrofits, small inverter disconnect, PV disconnect, AC or DC distribution. Used all around the world. 3/4 & 1” knockouts each end. Accepts up to 4 Din mount breakers from 1 to 63 Amps.
Environmental Rating – Type 1 (Indoor)
Max. AC Voltage – 277
Max. DC Voltage – 300
Max. Wire Size – 6 AWG
Warranty – 5 yrs.
Made in the USA

DESCRIPTION:
General use powder coated aluminum enclosure – holds up to 4 13mm wide din rail breakers from 1-63 amps.
The original Baby box has been a huge success in filling an industry need. We have created an enclosure called the Big Baby to over come the Baby Box smallness allowing for a ETL listed 4 position din rail box. This box is about twice as wide as the baby box giving you more wiring room. It also includes a ground box lug and mounting provisions for our short insulated bus bar as well as a ground bus bar. A dimensioned drawing is under documents on our website. FEATURES:
Environmental Rating – Type 1 (Indoor)
Big Baby’s DIN rail accepts up to 4 breakers (not included)
Quad accepts up to 4 panel mount breakers (not included)
Breakers: 1-63A
Max. Wire – breakers 6 AWG
Max. AC Voltage – 277VAC
Max. DC Voltage – 300VDC
Warranty – 5 yrs.
Listed by ETL for US & Canada
Made in the USA

XW POWER DISTRIBUTION PANEL DC/AC

MidNite Solars MNLBC-W250 is a 10 string disconnecting lithium battery combiner.

Combines up to 10 strings of batteries
Up to 1/0 wire per input
Rated for up to 80 volts DC maximum
250 amps maximum
250 amp weather proof disconnect built in
10 each 3/4 inch knock outs for cable entry
2 each 2 inch knock outs for cable entry
2 output studs 3/8 each
Type 3R aluminum powder coated enclosure
5 Year Warranty
ETL listed for US and Canada UL1741 and CSA
22.2

XW Single Inverter Panel