Flashing

DEKS Black Dektite Premium 5 – 127mm Penetrations. Aluminium base that can be formed to suit your roof profile.

Dektite has unique rubber boot design Provides good contact with flashed pipe providing a watertight seal.

Part number DFE103B suits 5-127mm pipe penetrations.

Retrofit flashings (also called a split flashing/or split boot) are used in applications where you cannot slide the flashing over / down a penetration. The retrofit flashing is split which allows you to wrap around the pipe penetration and seal. Fits pipes up to 2-3/4” in pull-over mode, and up to 2-1/4” in retrofit mode (cut, wrap-around and close with stainless steel clamps). Also included are 4 ports which can accomodate wiring or metal tubing. This model has a closed top, which can also adapt to regular (non-retro) items as small as 1/4” OD items.

Purpose made and high quality roof flashing solutions for metal roof applications. With the Dektite Metal Roof Flashing range, you’ll be able to flash almost any pipe penetration through a metal roof or wall. This range can also be used to seal penetrations through glass or plastic roofs. Choose from a Dektite Original or Premium for a quick watertight solution, a Dektite Combo or Dektite Retrofit if you need a wrap around solution, Dekstrip if you need to flash awkward or large penetration and many other flashings for a strong water tight seal.

DEKS PREM 7 X 7 BASE BLACK

1/8” to 3/4” Square Mini Standard Master Flash for Solar & Electric Applications, Model Mini (Red High Temperature Silicone)

Product Features
Smallest flashing available
Specifically Designed for Solar & Electrical Applications
Fits: Closed Top to 1” (0 to 25mm) Pipes • Base: 2-1/4” (57mm)
Weather Protection: This flashing is compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
Cut lines clearly marked to allow for easy installation for multiple pipe sizes.
A flexible aluminum base allows the flashing to conform to any panel configuration and most roof pitches regardless of pipe location.
Master Flash® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and Mechanical Officials (for the Uniform Plumbing Code) and remains the only product listed.
These products are also listed for use with Type B vents.

AZTEC FLASHING BLACK

The flexible design of this pipe flashing boot meets all roofing needs. Sleeve flexibility accommodates vibration and pipe movement caused by expansion or contraction. The soft aluminum base easily conforms to most metal roof profiles.

Closed to 5-3/4” Square Standard Master Flash for Metal Roofs, Model #3
Product Features
*Weather Protection: These flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.
*Cut lines clearly marked to allow for easy installation for multiple pipe sizes.
*A flexible aluminum base allows the flashing to conform to any panel configuration and most roof pitches regardless of pipe location.
*Master Flash® was used to create a new engineering standard for profiled roofing by the International Association of Plumbing and Mechanical Officials (for the Uniform Plumbing Code) and remains the only product listed.
*These products are also listed for use with Type B vents.

This standard roof flashing’s flexible design meets virtually all roofing needs. Made of EPDM, the flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light. Easy on-site customization allows for easy installation in usually five minutes, and the flexible soft aluminum base is designed to form a seal on most panel configurations and roof pitches regardless of pipe location.

ROOF VENT DIVERTER SHINGLE BASE