Flashing

ROOF VENT DIVERTER SHINGLE BASE

LEAD ROLL 12 X 300 inches (25ft) 2.5#

The QMCMT A 1 Conduit Mount for Tile is designed to lift electrical conduit off the roof to protect wiring from overheating. The Conduit Mount works with flat or curved tile and does not require tile cutting or grinding. All stainless steel hardware included.

The Quick MountTile Replacement Flashing for tile hooks provides a fast, simple and versatile way to install solar on tile roofs. The flashing replaces a tile, so there’s no messy, time-consuming tile grinding or cutting required. Works with all standard curved and flat tile roofs, and all standard rail-based racking systems.

The Tile Replacement Flashing for tile hooks is fully engineering to meet code requirements and industry best practices. Works with Flat, S-shaped and W-shaped tiles. Available in aluminum mill and black finishes.

Quick Mount PV’s Tile Conduit Penetration Flashing provides a quick, easy way to install conduit through the roof while protecting against water intrusion with two seamless, all-aluminum spun cone flashings. The innovative EPDM post collar can be easily customized to fit a 1/2”, 3/4” or 1” diameter conduit. This mount includes both top and sub-flashing to double flash tile roof penetrations for code compliance.

The Classic Shake Mount uses Quick Mount PV’s patented QBlock technology to provide the easiest, fastest, most universally code-compliant watertight mount available for wood shake roof installations. A single pilot hole is all it takes – just drill it, drive it, and you’re done.

*Patented waterproofing technology
*All-aluminum, full-sized flashing
*All exposed hardware is stainless steel
*Installs faster than any other flashed solar PV mounting
*Works with all standard racking systems
Made in USA
Designed to be adaptable, Quick Mount PV’s 18” x 18” flashing installs on East Coast style shake roofs (7.5-inch exposure over skip sheeting) and West Coast (10-inch exposure over solid sheeting) alike. The flashing slides quickly into place with no need to modify the shake to force a fit. Just a simple, watertight seal every time.

Quick Mount PV’s Classic Shake Mount is constructed of corrosion resistant material, including .050 aluminum flashing and stainless steel hardware, which last at least three times longer than galvanized parts. The Classic Shake Mounts bolt to any racking system with an L-foot interface, and integrate directly with Prosolar and Unistrut systems, as well.

Quick Mount PV’s QBase Low Slope Mount takes the traditional base-and-post PV mount to its ultimate level. It’s the strongest you can buy for mechanically attaching commercial solar systems to TPO, PVC, EPDM, built-up asphalt, and virtually all other non-metal low-slope roofs (aka ‘flat roofs’) used in commercial roofing.

Features

Safety – Patents pending. 100% IBC compliant. Meets or exceeds roofing industry best practices. QBase is the strongest off-the-shelf mechanical mount.
Efficiency – Great for solar hot water. All fasteners and hardware included. Attaches to roof with 2 or 4 fasteners. 3 post heights offer 7”, 9” and 12” clearance off the deck. All exposed hardware is 18-8 stainless steel.
User Friendly – Works with all leading racks. Available through leading distributors. 10-yr warranty; 50-yr expected life. Code compliant for all non-metal low slope roofs.

E-Mount uses the patented QBlock Elevated Water Seal technology to provide superior waterproofing on composition/asphalt shingle roofs. Priced at a modest premium over commodity roof mounts, E-Mount makes it possible to deliver Quick Mount PV quality even on price-sensitive jobs. All stainless steel hardware included for fast, single bolt installation.

Features

Safety – Made in USA. Patent numbers 7,762,027 & 7,895,808. 100% IBC compliant. Meets or exceeds roofing industry best practices. Patented Elevated Water Seal.
Efficiency – Works with all leading racks. 2554 lbs. average pullout (Douglas fir); 2203 lbs. average shear. All-aluminum 9” x 12” flashing.
User Friendly – No shingle cutting. Fast, simple one bolt installation. 10-year warranty; 50-year expected life. Bronze finish. Stainless steel hardware (included).

The TopTileTMMount System features two mounting options that secure panels 4-7 inches above the tile surface, using stanchions with water-proof sealing washers and moldable flashing. Installers can choose either SunModo’s patented deck mounting system when anchoring into deck or a rafter mounting system.

The Flashed L Foot provides a fully flashed roof fastener for attachment to composition roof with no required cutting of shingles. The L Foot is engineered for maximum adjustability for a clean, level installation.

Features

Highlights – Slotted attachment provides 1” vertical adjustability for array leveling. 1” spacers available for increased elevation adjustability. Silver or black anodized aluminum L Foot. Both are available with black galvanized steel or aluminum flashing. No cutting of shingles.